|
|
|
GT50CC
|
|
|
2
Step float Chargers 50W |
- Desktop battery chargers
- Float chargers , two step charging
- Rating = 50W
- Available in 12V, 24V and 36V
|
|
|
|
Centaur
|
|
|
3
Step Smart Chargers 300W - 3000W |
- Switched mode design , light
weight
- Output options: 12V , 24V
- Power levels from 300W to 3000W
- Wide operating temperature range
-20'C to 60'C
- Universal
AC Input: 85-264VAC
- Temperature
compenation & Sensor
interface
- Suitable
for mobile and marine applications
- Remote
voltage sensing to compensate
for cable voltage drop
|
|
|
|
SKYLLA
|
|
|
3
Step Smart Chargers 900W - 3000W |
- Switched mode design , light
weight
- Output options: 24V , 48V
- Power levels from 900W to 3000W
- Wide operating temperature range
-20'C to 60'C
- Temperature
compenation& Sensor
interface
- Suitable
for mobile and marine applications
- Remote
voltage sensing to compensate
for cable voltage drop
|
|
|
|
SA-VBA
|
|
|
Encapsulated
Battery
Chargers 100W - 200W |
- Switched mode design , Fully
Encapsulated
- Output options: 12V,24V
- Power levels from 100W to 200W
- Wide operating temperature range
-20'C to 60'C
- Protected
against overheating
- Suitable
for mobile and marine applications
|
|
|
|
Snaptec
Blue Power
|
|
|
Universal
Chargers 100W - 200W |
- Switched mode design
- Universal input
90-265VAC or 90-350VDC
- Output options: 12V,24V
- Power levels from 100W to 200W
- Adaptive 4 stage
charge characteristic: bulk - absorption - float
- storage
- Microprocessor controlled
'adaptive battery management' to optimise the charging
process relative to the way the battery is being
used
|
|
|
|
2240 Series
|
|
|
Lead
Acid & Li-Ion Battery Charger 15W |
- Universal input 90~~264VAC
- 3--step charge control with current
detection
- as charge termination
- LED indicates charger state
- Suitable for Lead Acid batteries
and
- LI-ION batteries (LI model )
- Available in 6V,,12V,and 24V
lead acid batteries
- Available for1--4 LI-ION battery
cells
- Custom specification on request
- Medical approval EN60601 and
EN60950
- CE marked and EMC approval
|
|
|
|
9640
|
|
|
Battery
Chargers 40W |
- 3-step charge control with timer
- Plug-in unit,switch mode design
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- LED indicators with three different
colours
- Medical approval,,EN60601
- Safety approval AS3260:N155923
- Optional battery clips or barrel
type output connector
- EMC approved,CE marked
|
|
|
|
9940
|
|
|
Battery
Chargers 40W |
- 3-step charge control with timer
- Universal input 100~~240 VAC
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- LED indicators with three different
colours
- Medical approval EN60601
- Safety approval AS60950-N19260
- Optional battery clips or barrel
type output connector
- IEC 320 2-pin input connector
- EMC approved,CE marked
- Options:
- -mounting bracket:“9940-Bracket
”
- -also available as a simple Float
Charger
|
|
|
|
2040
|
|
|
Battery
Chargers 50W |
- 3-step charge control with timer
- Universal input 100~~240 VAC
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- LED indicators with three different
colours
- Medical approval EN60601
- Safety approval AS60950-N19260
- IEC 320 3-pin input connector
- EMC approved,CE marked
- Options :mounting bracket “2040-bracket
”
|
|
|
|
2047
|
|
|
Battery
Chargers 130W |
- 3--step charge control with timer
- Wide input::190~264 VAC
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- Short circuit protection
- LED indicators with three different
colours
- EMC approved,,CE marked
- Optional mounting brackets
|
|
|
|
9840-9740-2045
|
|
|
Battery
Chargers 75W - 240W |
- 3-step charge control with timer
- 75W,,150W and 240W models
- Compact switch mode design
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- LED indicators with three different
colours
- Available with medical approval,,EN60601
- Safety approval AS3260:CS7485N
- EMC approved,CE marked
- Medical approval EN60601,,9740
&9840 models
|
|
|
|
SNB
SERIES
|
|
|
Battery
Chargers 250W - 750W |
- Wide AC input 90 - 264
VAC
- High
efficiency, switched mode
design.
- Fully
isolated output
- Power
fail and battery fail alarms
- DC
ok and battery ok LEDs
- Isolation
diode
- Battery
fuse protected
- Overload
and OVP protection of rectifier
module
- Wall
mount enclosure with battery
"SNBW"
- AS3260
approved rectifier modules
No. CS7067N
- Low
volt disconnect - option
|
|
|
|
SRB
SERIES
|
|
|
Battery
Chargers 250W - 750W |
- SR Boost
charger is fully automatic, with both temperature compensation and boost
features to provide battery recovery in the shortest practicable
time.
- The units are equally suited to both 'standby' (e.g.
generator start battery) and 'cyclic' (e.g. wheelchair and other portable
equipment batteries). In addition, they can be employed to charge both sealed
and flooded lead-acid battery types.
- Fully automatic operation.
- Compact, lightweight and
highly efficient.
- Switchmode
technology.
- Non-destructive "ERBP"
reverse polarity protection (no fuses employed or required).
- Temperature compensation as
standard.
- Current limit factory
preset to match battery capacity (default: 100%).
- Indefinite short circuit
protection.
- Robust performance in all
charging conditions.
LED indicators: Charger ON, Boost,
Float.
- Mounting brackets for
permanent fixture.
- ISO9001 design management
system
- Fully designed and
manufactured in New Zealand
- 100w, 250w,
500W and 750W standard models.
- 13.8V, 27.6V, 41.4V, 55.2V
standard models.
- 24 month
warranty.
For situations
where there is a standing load on the battery, we recommend initial
consideration of our SRC
series which is optimised for this use.
|
|
|
|
2043 -
2044
|
|
|
Battery
Chargers 120W - 240W |
- 3--step charge control with timer
- Universal input::100~240 VAC
(2043 Series)
- Power factor corrected 0.99 ((2043
Series)
- Charge current not affected by
input voltage fluctuations
- Protected against reverse polarity
- LED indicators with three different
colours
- Safety approvals EN60335--2-29,AS3260
pending
- EMC approved,,CE marked
- Leads with battery clips
- Field proven reliability
- 3 pin IEC320 input connector
with mains cord
|
|
|
|
CA-CX
|
|
|
Battery
Chargers 200W - 1000W |
- Switched mode design
- Output options::12V,24V,36V,48V,60V
&108V
- Power levels from 200 to 750
watts
- Constant voltage/constant current
operation
- Overvoltage and overload protection
- Power Fail and Battery Low alarm
signals
- Temperature compensation charging
- EMC to EN55022 and EN61000
- N+1 redundancy operation
- CE marked to Low Voltage Directive
- AS3260 safety approval:NCS7346N
- EMC approved
- Battery low volt disconnect
|
|
|
|
BR
|
|
|
Battery
Charging Systems 170W - 2500W |
- Input 115 /230 VAC,other options
on request
- Output 12 ~~130 VDC,other options
on request
- 3U x 19 inch rack assembly,fully
wired
- N+1 redundancy of rectifiers
@170W each
- System can take up to four rectifiers
--700W
- without redundancy or 540W with
redundancy
- Hot swap capability under full
load
- Front panel test points and volts
adjustment
- Alarms and LED indicators,Volt
and Amp meters
- Low battery disconnect
- Input AC breaker,battery breaker
- DC distribution breakers option
- Customised solutions on request
|
|
|
|
SRC
SERIES
|
|
|
Battery
Chargers 250W - 750W |
|
Temperature
Compensated battery float voltage.
Battery
charge current limiter.
Alarms
(relay). PSU OK, Battery System OK.
Battery
deep discharge protection - disconnect/reconnect with alarm.
Rapid
install / de-install with all connections via Phoenix connector
blocks, (for systems <20A).
Wide
input voltage window tolerance.
Precise
Voltage and Current controls.
Compact
and lightweight.
High
efficiency - (typically >85%) using switchmode technology.
Self
resetting electronic circuit breaker for overload, short circuit
or reverse polarity protection.
Conservative
design for long life.
ISO9001
design management system.
Optionally
available regular battery condition and presence testing at pre-determined
intervals, (currently 250W and above).
Customisable
'load vs charge' proportions.
Rack
and wall mounting options.
24
month warranty.
Standard
voltages options: 12, 24, 30, 36, 40,
48 and 110V.
More
Information.......
|
|
|
|
TRT Series
|
|
|
Li-Ion Battery Chargers |
- Smart Charging algorithm for
Li-Ion batteries
- C-tick marked and safety authority
approved
- Safety timer feature
- 1
to 10 Cells models available
- Highest
quality available in the
market
- DC
input , comes with
proper AC adaptor
- Custom
designs available
|
|
|
|
TRT
V2 Series
|
|
|
Li-Ion /
NiMH / NiCD / Lead Acid Programmable Battery Chargers |
- Smart Charging algorithms for
Li-Ion or NiMH or NiCD or
Lead Acid batterry chargers
- All charger parameters
are progrmmable to specific battery application
- Temperature sensing
thermistor function
- C-tick marked and safety authority
approved
- Safety timer feature
- Highest
quality available in the
market
- DC
input , comes with
proper AC adaptor
- Power
Level from 20W to 40W
- Can be connected
in parallel for increased power
- Flexible building
block for numerous battery charging applications.
|
|
|
|
STN Series
|
|
|
NiMH
/ NICD Battery Chargers 1 to
12 Cells |
- Smart Charging algorithm for
NiMH and NICD battery chargers
- C-tick marked and safety authority
approved
- Safety timer feature
- 1
to 12 Cells models available
- Highest
quality available in the
market
- DC
input , comes with
proper AC adaptor
- Custom
designs available
|
|
|