|     Home   |   Technical Notes   |  Send Enquiry   |   Contact Snaptec    |

 

AC/DC Laboratory Power Supplies: This section presents a number of lab power supplies with power ranging from 30W to 15KW. Applications can be found in laboratories , schools univerities , research centres and industry. We also supply a wide range of high voltage variable power supplies, these power supplies are highly specialized and used in national laboratories , universities ,defence and industrial applications

SERIES SELECTION TABLE:

 

Series

Power

Outputs

Features

 

GEN

750W , 1.5KW , 3.3KW , 10KW , 15KW

Single

High grade 1RU High or 2RU

 

GEN-HALF

750W

Single

High grade , 1RU High , Half Rack

 

MHY

30~315W

Single , Dual/ triple

High Quality , Low cost

 

ST

30~300W

Single and triple

High Quality , Low cost

 

XKW

1kw~3kw

 Single

High grade

 

XFR

1.2kw~2.8kw

 Single

High grade

 

S-XDS

5kw-10kw-15kw

 Single

High grade , 3ph input

 

XDC

6kw-12kw

 Single

High grade , 3ph input

 

ESS

10kw~15kw

 Single

High grade , 3ph input

 

SR-HV

300W~15kw

 Single

High Voltage Power Supplies 1KV - 150KV

GEN

Support Documents

Genesys series lab power supplies 750w and 1500w 1RU high industrial
genesys_2u_3300w.gif 

750W or 1500W or 3300W, 1RU or 2RU programmable

  • Universal input 85~264 VAC
  • Active Power Factor Correction 0.99
  • High power density 1500W in 1U rack
  • Output up to 600V, current up to 200A
  • Built in RS232/RS485 interface - standard
  • Optional GPIB (SCP) interface
  • Software calibration and Last Setting Memory
  • High resolution 16 bits ADCs and DACs
  • Reliable encoders for voltage and current adjustment
  • Constant voltage/constant current
  • Parallel operation with Active Current Sharing, with up to 4
  • units in master slave mode and single wire current share
  • Series Operation ... maximum 2 units with external diodes
  • Independent remote ON/OFF
  • Remote enable/disable
  • External analog programming and monitoring
  • Optional isolated analog programming and monitoring
  • Lab View and Lab Windows drivers
  • Conformal coating option - “CC”
 

GEN-HALF

Support Documents

Genesys half series 750W half 1RU industrial lab power supplies

750W half width, 1RU programmable

  • Highest Power Density available:
  • 750W in a 1U half-rack size.
  • Wide Range Input (85 - 265Vac Continuous)
  • Active Power Factor Correction (0.99 typical)
  • Output Voltage up to 600V, Current up to 100A
  • Built-in RS-232/RS-485 Interface
  • Front Panel Lockout
  • Last-Setting Memory
  • High Resolution 16 bit ADCs & DACs
  • Reliable Encoders for Voltage and Current Adjustment
  • Constant Voltage/Constant Current auto-crossover
  • Parallel Operation with Active Current Sharing
  • Independent Remote ON/OFF and Remote
  • Enable/Disable
  • External Analog Programming and Monitoring
  • Reliable Modular and SMT Design
  • 19" Rack Mounted ATE benchtop and OEM applications
  • Side-by-side mounting of two units in a 19” rack
  • Optional Isolated Analog Programming and Monitoring
  • Optional IEEE 488.2 SCPI (GPIB) Interface
  • LabView® and LabWindows® drivers
 

XFR

Support Documents

xfr series 1200W and 2800W industrial lab power supplies 2RU rack mount

1200W or 2800W

  • Nineteen 1200 and 2800 watt models
  • Zero voltage "soft" switching for high efficiency, low noise and high reliability
  • Analog programming standard, optional ISOL (isolated programming) option
  • Optional internal 16-bit GPIB (IEEE 488) and RS-232 control
  • Constant voltage or constant current operation with automatic crossover and mode indication
  • LabView® and LabWindows® drivers
  • OVP, current limit, thermal protection
  • Standby mode
  • Front panel button preview of voltage, current, OVP
  • Remote/local modes
  • Remote sense, 5 V line loss compensation
  • CE, CSA, UL approvals
 

ST

Support Documents

ST series general lab power supply 60W to 300W

60W - 300W , Single / Multi Output

  • Input options: 100/120/220/240 VAC
  • Analog (A) or Digital (D) meter options
  • Constant current/constant voltage operation
  • Series or parallel operation
  • Short circuit protection
  • Coarse and fine voltage control
  • Master/slave operation - option R
  • Output ON/OFF remote control - option R
  • Output current voltage controlloble by external variable voltage or resistance - option R
  • Voltage/current readback option
  • The TP3000 series comes with two analog or optional digital meters. All outputs are floating and can be connected in parallel or series to get multiple currents and voltages.
 

MHY

Support Documents

HY series general lab power supplies single and dual output 60w to 330w

60W - 330W , Single / Multi Output

  • Variable DC Power Supplies
  • Low Cost
  • 3.5 Digits LCD display for voltage and current
  • Single and Dual output
  • Variable voltage and current control
  • Coarse and fine adjustment
  • Dual output models with fixed third output
  • Dual Input Voltage 110/220VAC +/-10%
 

S-XDS

Support Documents

SXDS Lab power supplies 5KW 10KW 15KW 3RU rack mount 3 phase input

5KW , 10KW , 15KW Single output

  • Compact Modular DC Power: Uses less rack space compared to other DC supplies of similar power level.
  • Modular construction supports 5, 10 and 15 KW versions.
  • Wide Range of Applications Telecommunications, automotive, industrial and commercial applications.
  • Built-in Measurements Voltage, current and power readback capability standard.
  • Fast Transient Response Capable of driving demanding loads.
  • Standard RS232C Interface and optional GPIB.
  • Instrument drivers and software support for easy system integration.
 

XKW

Support Documents

xkw series lab power supplies 1000W to 3000W rack mount lab power supplies

1000W - 3000W

  • Switched mode design.
  • Thermal shutdown.
  • Overvoltage protection.
  • V & A meters.
  • Voltage and current control.
  • CV or CC operation.
  • GPIB interface.
  • Safety: CSA, UL.
  • EMC approved.
 

XDC

Support Documents

xdc series 6000w lab power supplies

6KW - 12KW

  • Wide input 3 phase 208 VAC or 415 VAC
  • Power factor corrected 0.9
  • CE marked
  • Constant power mode
  • Overvoltage protection with adjustment 5% to 103%
  • Digital processing with 16-bit control for high accuracy
  • Ten store/recall set-up locations
  • Digital keypad and encoded knobs for fast front panel operation
  • Nine self-protection mechanisms
  • Isolated analog programming and readback standard
  • RS-232 standard
  • LabView and LabWindows drivers
  • CANbus communications link option for multi unit current sharing sharing (master slave) and addressing
 

ESS

Support Documents

Lambda ESS 10kw to 15kw lab power supplies

10KW - 15KW

  • Three phase input (various options)
  • 10Kw and 15Kw output power
  • Output voltage options from 7.5 ~ 600 VDC
  • Front panel adjustable OVP
  • Short circuit protection
  • Thermal protection includes LED indicators
  • Pulse by pulse current limit for fast recovery
  • Series or parallel operation of units
  • Transient protection
  • Phase loss detection (neutral loss detection is included above 208 VAC input models)
  • Soft start
  • Power factor corrected 0.9
  • Voltage and current programming monitoring are 0-5V standard (0-10V optional)
  • UL and CE approval on some models
  • CV and CC with automatic crossover with LED indicators
  • Choice of analog or digital meters
  • 19in x 5U rack mounting
 

SR-HV

Support Documents


300W - 15KW , 1KV -150KV

  • Advanced High Voltage Power Supplies from 1KV up to 150KV
  • Continuous adjustable Voltage & Current
  • Customised voltage and current ratings available
  • Full protection against arcs, overloads and short circuits
  • Compact design using Double Resonance Technology (ZVC)
  • V & C Setting and Monitoring from front panel or Remote
  • Automatic crossover
  • Over Current Limitation and Protection functions
  • Remote, Inhibit & Interlock functions
  • Polarity display
  • Safety switch key
 Copyright 2006 Snaptec Australia

Battery chargers . dc/dc converter . industrial power . electronics backup . dc power . frequency converters . laboratory power . medical power . security power supplies . power inverters . power converters . regulated power . Medical Power Supplies . Power Supply Acceccoseris . Rack Mount Power Supplies . Power Supplies Single Output AC/DC Power Supplies . Batteries . Sealed Lead Acid Multi Output AC/DC Power Supplies . DC/DC PCB Mounting Converters & Power Modules . DC/DC Converters--Vented Case . Battery Chargers for Cyclic & Stand-by Applications . Laboratory Power Supplies . DIN Rail Power Supplies . DC/DC Converters for Rail Applications . DC/AC Power Inverters, AC/AC Frequency Converters . AC/DC External Power Supplies  . AC/DC and DC/DC Eurocard Power Supplies . AC/DC Modular Power Supplies . Line Conditioners . Accessories . 19in Rack Mount & DIN Rail Kits

 


Snaptec Australia can assist in the following areas :
AC/AC power frequency converters
AC/DC External Power SuppliesAC/DC and DC/DC Eurocard Power Supplies . AC/DC Modular Power Supplies . AC/DC laboratory power supplies . AC/DC High voltage power supplies . Battery Chargers for Cyclic applications . Battery charrgers for Standby Applications . Battery Chargers for Marine applications . Batteries Sealed Lead Acid . Medical power supplies . Security power supplies . Multi Output AC/DC Power SuppliesDIN Rail Power Supplies . DC/DC PCB Mounting Converters . DC/DC PCB Mounting Power Modules DC/DC Converters with Vented CaseDC/DC Converters for Rail Applications . DC/DC converters . DC power systems . DC/AC Power Inverters . Power converters . Regulated Power supplies . Unregulated Power Supplies . Power Supply Acceccoseris . Rack Mount Power Supplies . 19inch  23inch Single Output AC/DC Power Supplies . Line Conditioners .

Information | Models 1   2  | Manufacturers | Product Items 1  2|......................... | Surplus Stock | Parts Files |