SDP

AC or DC 19" MCB Distribution Panel

• Low cost enhancement to any rack mounted system using the SR Series or other products.
• Centre divided, allowing segregation of AC and DC if required
• Accommodates a maximum of 20 standard single pole breakers, 10 double pole breakers, or 10 single pole breakers with indicating contacts.
• MCBs used are standard 6kA B-curve to maximum 32A (ABB 251 series or equivalent).
• Ratings available: 6A, 10A, 16A, 20A and 32A. Any combination of MCBs may be specified.
• Front panel detachable to allow easy fitting or removal of breakers.

DPM

Digital Panel Voltmeter Ammeter

• Self Powered with on-board wide input DC/DC converter (8-150V)
• Nil resistance Current Transducer eliminates need for shunt
• 2x 16 character LCD display
• Any DC input from 12V to 110V nominal and up to 60A current
• Flexible mounting to panel (front or rear), or DIN rail
• Bi-directional current sensing
• RS-232 digital output for PC monitoring

DLP-PU

Redundancy Alarm Module 24V 20A

• Dual input : 24Vdc (A & B)
• Suitable for n+1 redundancy applications of 24VDC power systems ...built-in isolation diodes
• Alarm relay, isolated contact outputs, N/C, Com, N/O, closed = input DC OK
• DIN Rail or Panel mounting
• Dual front panel LEDs for DC OK
• Safety approvals
• Can be used with any 24VDC power supply or DC-DC converter

SOD

Oring Diode Assemblies

• Robust Design
• Convection Cooling
• Allow current sharing between two power supplies connected in parallel
• Can connect more than two power supplies
• Provides 1+1 redundancy arrangement
• Built in cooling for diodes
• Ratings from 10A to 200A 

SR-RM

Rack Mount Option For SR Units

• 2U, 19”
• All connections at rear
• Alarm options
• Metering options
• Parallel redundancy options
• Fully customised solutions

WMC

Wall Mount Cabinet

• Dimensions 450w x 400h x 280d (mm)
• Numerous combinations of power supplies , meters , circuit breakers and terminals
• Top section with clear window to show internal indications

A2 Option

PC Board for AC/DC Power Modules

• PC Board to converter any of the AC/DC PCB mount power modules into a screw terminal chassis mount power supply

Voltage Monitor

Voltage Monitor Card for 12V , 24V , 48V systems

• DC input options: 12V, 24V and 48V
• Two voltage monitors with LED
• Status available via relay change over contacts
• Each Channel can be set to monitor any voltage level between 10 - 32V or 20 - 60V
• Easy panel mount package with screw terminals
• Suitable for a wide range of applicationsDimensions 450w x 400h x 280d (mm)

19" Rack Enclosures

19" Rack Enclosures

• 19" Rack mount cases , 1U , 2U and 3U high
• Front panel AC power switch with Neon indicator
• Removable cover
• Rear IEC socket for AC mains input
• Two or Four way 30A or 65A high quality Phoenix screw terminals for DC Output
• Sturdy metal unit, powder coated grey finish.