IEC-320 Appliance Connectors
The IEC (International Electrotechnical Commission) is the international standards and conformity assessment body for all fields of electrotechnology.
A set of thirteen plugs (called the connector in the specification) and thirteen matching sockets (called the appliance inlet) are defined by specification IEC 60320. A set of 11 connectors/appliance-inlets are defined in specification AS/NZS 60320.1:2004.
The plugs and sockets have either two or three -conductors to suit either Class I or Class II equipment with varying current capacities and temperature ratings.
A plug's matching socket is designated by an even number that is one number higher than the odd number assigned to the plug. Therefore, a C13 plug fits into a C14 socket, a C19 plug fits a C20 socket etc.
The information in the table below is based on the Australian/New Zealand Standard AS/NZS 60320.1:2004.
Connector Type Connector (1) Appliance
Inlet (2)Class of Equipment (3) Maximum
Temperature of Appliance Inlet(2)Rated Current of Appliance Coupler(4)
(RMS Amps)C1 C2 II 70°C 0.2 C5 C6 I 70°C 2.5 C7 C8 II 70°C 2.5 C9 C10 II 70°C 6.0 C13 C14 I 70°C 10.0 C15 C16 I 120°C 10.0 C15A C16A I 155°C 10.0 C17 C18 II 70°C 10.0 C19 C20 I 70°C 16.0 C21 C22 I 155°C 16.0 C23 C24 II 70°C 16.0
The information in the table below is based on IEC 60320
Connector Type Connector (1) Appliance
Inlet (2)Class of Equipment (3) Maximum
Temperature of Appliance Inlet(2)Rated Current of Appliance Coupler(4)
(RMS Amps)C3 C4 II 70°C 2.5 C11 C12 II 70°C 10.0 Legend
(1) Connector Part of the appliance coupler integral with, or intended to be attached to, the cord connected to the supply. Only one cord is connected to the Connector. (2) Appliance Inlet Part of the Appliance Coupler integrated or incorporated in the appliance or equipment or intended to be fixed to it. An Appliance Inlet integrated in an appliance or equipment is an Appliance Inlet (the shroud and base of) which is formed by the housing of the appliance or equipment. An Appliance Inlet incorporated in an appliance or an equipment is a separate Appliance Inlet built in or fixed to an appliance or equipment. (3) Class of Equipment Class I equipment has an earth connector. Class II equipment has only active & neutral pins with no earth. (4) Appliance Coupler A means of enabling the connection and disconnection at will, of a cord to an appliance or other equipment. It consists of two parts: a Connector and an Appliance inlet.
Battery chargers . dc/dc converter . industrial power . electronics backup . dc power . frequency converters . laboratory power . medical power . security power supplies . power inverters . power converters . regulated power . Medical Power Supplies . Power Supply Acceccoseris . Rack Mount Power Supplies . Power Supplies Single Output AC/DC Power Supplies . Batteries . Sealed Lead Acid Multi Output AC/DC Power Supplies . DC/DC PCB Mounting Converters & Power Modules . DC/DC Converters--Vented Case . Battery Chargers for Cyclic & Stand-by Applications . Laboratory Power Supplies . DIN Rail Power Supplies . DC/DC Converters for Rail Applications . DC/AC Power Inverters, AC/AC Frequency Converters . AC/DC External Power Supplies . AC/DC and DC/DC Eurocard Power Supplies . AC/DC Modular Power Supplies . Line Conditioners . Accessories . 19in Rack Mount & DIN Rail Kits