Auto-start circuitry automatically switches the inverter ON and OFF with applied appliances. The Autostart is an important feature as it maximises valuable battery capacity. Sensitivity of the Autostart can be easily adjusted to either start small appliances or run continuously. High Efficiency Toroidal Transformer Toroidal transformers provide outstanding efficiency and durability. When sized correctly, high surge rating allows easy starting of motors and high inrush current devices. DC Circuit Breaker/ Battery Isolator Switch DC Circuit Breaker protects the inverter and cables from becoming a potential fire hazard under fault conditions, as well as providing a point of isolation from your batteries when switched OFF. The circuit breaker is designed for ease of operation and safety. If the Inverter shuts down due to Overload, Undervolts or Overvolts it can be reset.
Full 3500V AC/DC isolation. Galvanically isolated. High quality, high current, heavy duty DC leads for low loss power delivery. LED Status Indicators Power indicator (green LED). This LED flashes when in Standby mode (i.e. no loads connected). When a load is applied the LED will illuminate continuously to indicate that 230V AC is being supplied. When the Inverter is switched on all 3 LED lights light up for 1 second while the microprocessor performs a start up and system check procedure. A large range of options from custom voltages and alarm contacts to vibration proofing and conformal coatings are available. Massive Inrush and Overload Capability.